Using Constrained Multi-Optimization in
Design of Composite for Filament Wound
High Pressure Vessels

Dijana Cvetkoska; Igor Dimovski; Samoil Samak; Mirjana Trompeska; Vladimir Dukovski

doi:https://doi.org/10.14445/22315373/IJMTT-V61P516

International Journal of Mathematics Trends and Technology

Research Article | Open Access | Download PDF

Volume 61 | Number 2 | Year 2018 | Article Id. IJMTT-V61P516 | DOI : https://doi.org/10.14445/22315373/IJMTT-V61P516

Using Constrained Multi-Optimization in Design of Composite for Filament Wound High Pressure Vessels

Dijana Cvetkoska, Igor Dimovski, Samoil Samak, Mirjana Trompeska, Vladimir Dukovski

Abstract

Composites as multiphase materials offer the possibility to influence their properties or to add new functionalities by a proper choice and combination of the different phases. In addition to get best properties for the composite design numerous calculations for different combination of the fibers winding angles should be done. This paper targets the design of a composite laminate structure used for production of high pressure vessel. The application developed in this research manages to design a composite with most effective elastic modules, in a time shorter than the usual composite designing time, taking into account filament winding process, materials price as well as the purpose of the final product. This application uses a database of available materials in order to point out which combination creates a pressure vessel of cheaper composite material with the best strength, bulk modulus and load level of failure.

Keywords

composite design; composite material; database of materials; multi-objective optimization; high pressure vessel

References

[1] Saidpatil, V. V.; Thakare, A. S. “Design & Weight Optimization of Pressure Vessel Due to Thickness Using Finite Element Analysis.” International Journal of Emerging Engineering Research and Technology, 2, 3(2014), pp. 1-8
[2] Hassan, S.; Kumar, K.; Raj, C. D.; Sridhar, K. “Design and optimisation of pressure vessel using metaheuristic approach.” Applied Mechanics and Materials, 465 (2014), pp. 401-406. DOI: 10.4028/www.scientific.net/AMM.465-466.
[3] Miravete, A. Optimization of design of composite structures. Woodhead Publishing Limited, Cambridge, 1996
[4] Adali, S.; Summers, E. B.; Verijenko, V. E. “Optimisation of laminated cylindrical pressure vessels under strength criterion.” Composite structures, 25,1( 1993), pp. 305-312. DOI: 10.1016/0263-8223(93)90177-R
[5] Kss, R. Y.; Mohan, R. K.; Kiran, B. V. “Composite pressure vessels.” International Journal of Research in Engineering and Technology, 1, 4(2002), pp. 597-618
[6] Pelletier, J. L.; Vel, S. S. “Multi-objective optimization of fiber reinforced composite laminates for strength, stiffness and minimal mass.” Computers & structures, 84, 29(2006), pp. 2065-2080. DOI: 10.1016/j.compstruc.2006.06.001
[7] Kaw, A. K. Mechanics of composite materials. 2nd. ed. CRC press, Boca Raton, 2006
[8] Voyiadjis, G. Z.; Kattan, P. I. “Mechanics of composite materials with MATLAB.” Springer - Verlag Berlin Heidelberg, 2005. DOI: 10.1007/3-540-27710-2
[9] Composites Design and Manufacture. Plymouth University [Online]: http://www.tech.plym.ac.uk/sme/MATS324/MATS324A2%20E-G-nu.htm#K (18.12.2014).
[10] Supercomputing service provider, Arctur web universe [Online]: https://www.arctur.si/references/web_sites/2015020613122861/ (03.04.2016)
[11] Sharma, N.; Gobbert, M. K. A comparative evaluation of Matlab, Octave, FreeMat, and Scilab for research and teaching. ITAM. [Online]: http://ciep.itam.mx/~rtorres/progdin/comparative-evaluation-of-matlab-octave-scilab-freemat.pdf (08.03.2016)
[12] Eaton, J. W.; Bateman, D.; Hauberg, S.; Wehbring, R. GNU Octave version 4.0.0 manual: a highlevel interactive language for numerical computations. GNU Octave. URL: http://www.gnu.org/software/octave/doc/v4.0.1/ (05.06.2015).
[13] Povalej, Ž. “Metode smeri spusta v večkriterijski optimizaciji.(2013)”. (Doctoral dissertation Univerza Ljubljani, Ž. Povalej).
[14] Robič, T.; Filipič, B. DEMO: “Differential evolution for multiobjective optimization.” Evolutionary multi-criterion optimization 3410(2005). pp. 520-533. DOI: 10.1007/978-3-540-31880-4_36
[15] Composite Oracle, [Online]: http://www.composite-oracle.com/main.asp?q=13 (07.06.2015).
[16] Groover, M. P. “Fundamentals of modern manufacturing: materials processes, and systems.” John Wiley & Sons, Hoboken, 2007.
[17] Design consulting company, filament winding software. Mikrosam [Online]: http://www.mikrosam.com/new/article/en/winding-expert/ (03.04.2016)
[18] Chong, E. K.; Zak, S. H. “An introduction to optimization.” 2nd. ed., John Wiley and Sons, New York, 2001.

Citation :

Dijana Cvetkoska, Igor Dimovski, Samoil Samak, Mirjana Trompeska, Vladimir Dukovski, "Using Constrained Multi-Optimization in Design of Composite for Filament Wound High Pressure Vessels," International Journal of Mathematics Trends and Technology (IJMTT), vol. 61, no. 2, pp. 107-116, 2018. Crossref, https://doi.org/10.14445/22315373/IJMTT-V61P516